Technical Documents & Buyer Resources
Everything you need to evaluate the Hanging PV Micro-Storage System for your project. Download the full brochure, review the buyer FAQ, and explore the pilot roadmap.
Hanging PV Micro-Storage System
Panel-Mounted, Per-Panel Wireless Energy Storage & Optimization for Existing Solar Plants
Questions Your Team Will Ask
We have organized the most common buyer questions by category. Download the full brochure for detailed answers to each.
Battery & Safety
- Cell brand, model and chemistry (LFP)?
- Per-rod capacity and rated power?
- Max operating temperature?
- IEC 62619 / IEC 63056 / UN38.3 certification status?
- UL9540A or equivalent thermal-runaway test results?
- Does one rod fault affect neighbors?
- Does under-mount raise back-sheet temperature?
Electrical Compatibility
- Compatible with Huawei, Sungrow, SMA, PowerElectronics inverters?
- DC voltage range and max short-circuit current?
- Per-panel power range?
- Can connect to existing strings without shutdown?
- Bypass on fault — does system run if wireless drops?
Mechanical & Environmental
- Rack load capacity requirement?
- Wind and snow load calculation?
- IP65/IP66 rating for heat, dust, salt spray, humidity?
- Does under-mount block ventilation or cause hot-spot aging?
- Device life vs module life match?
O&M and Commercial
- Warranty years and degradation warranty definition?
- Local spare parts availability?
- How to swap a single rod?
- Max wireless nodes per gateway?
- Does EMS support local tariff and grid rules?
- Project payback period?
Recommended Commercial Entry Sequence
A three-stage approach from domestic validation to international expansion, with clear milestones at each phase.
Domestic Northwest Proof
- 100 MW-class old-plant retrofit in Inner Mongolia, Xinjiang, Gansu, Qinghai, Ningxia
- Run a 1-5 MW validation zone
- Collect 6+ months of run data
- Compare against un-retrofitted area
- Prove yield gain, storage efficiency, O&M cost
Telecom Towers
- China Tower domestic deployment
- Africa, India, South Africa tower sites
- Middle-East remote sites
- Standard package: 48 V, 3.2 kWh, PV input, tower load, remote monitoring, diesel linkage
International Expansion
- India, South Africa, Australia, Middle East
- Choose local partners: PV EPC, telecom-energy providers, inverter dealers
- Use one well-resourced local partner per country for a reference project
- Do not set up independent sales teams in every country initially
What We Can Provide for Your Evaluation
A complete evidence pack to support your internal decision-making, insurance review and board approval.
Continuous Run Data
1 MW+ real project with before/after generation comparison.
Efficiency Tests
Charge/discharge efficiency, per-panel MPPT gain, yield under different shading ratios.
Investment Comparison
Vs centralized storage and vs string storage on total cost of ownership.
Wireless Reliability
Packet-loss, latency, coverage distance, extreme temperature run data.
Mechanical Reports
Rack load-bearing, wind-load, single-point thermal-runaway and fault-isolation tests.
Installation Data
Field labor-time statistics, disassembly and relocation case, overseas BOM and process files.
Safety Documents
Insurer-accepted fire and safety documentation, detailed project revenue model template.
Frequently Asked Questions
What is the minimum order and pilot scale?+
Pilots typically start from a few dozen bars on one or two arrays. You verify yield and storage data on your own meters before scaling to megawatt level.
Does installation interrupt plant operation?+
No. Bars clamp under existing rails and join the string electrically while the plant keeps generating. Most retrofits are completed row by row during normal operation.
Which certifications and compliance documents do you provide?+
The system is certified to IEC 62109-1 and rated IP65 for outdoor use. We supply test reports, safety documentation and insurance-oriented risk descriptions for your market.
How does overseas delivery and local assembly work?+
Core components ship knocked-down from China, housings are assembled on site, and we support local certification, commissioning and after-sales training for your team.
Ready to Start Your Evaluation?
Contact our engineers with your project details. We respond within one business day with a configuration estimate and relevant reference cases.